| SkullandBonesSkateboards.com Forum Index » SCREEN PRINTING » 2 halogens |
|
Page 1 of 1 |
|
| Author |
Message |
| speedwulf |
 Posted: Mon Jul 07, 2008 3:15 pm |
 |
|
|
Joined: 19 Aug 2007
Posts: 39
|
| i bought a 1000 watt halogen setup consisting of 2 side by side 500w halogens. if i used them like this would i have problems with undercutting?Or should i just use one lamp?Im thinking about mounting it overhead rather than under to try to deflect a little heat from the glass. |
|
|
| Back to top |
 
|
|
|
| ogsk8r |
| Posted: Mon Jul 07, 2008 6:04 pm |
|
|
ORDER OF THE SKULL
Joined: 06 Jan 2006
Posts: 2701
Location: las vegas, nv.
|
| i burn my screens with those construction side by side halogens and i face the lights down at the screen & i have no problems in burning screens.i keep it about a a foot & 1/2 above the glass. hope this helps |
_________________
Yea Cornmelia !!!! |
|
| Back to top |
|
| speedwulf |
| Posted: Tue Jul 08, 2008 10:18 pm |
|
|
|
Joined: 19 Aug 2007
Posts: 39
|
| What exposure time are you getting with this setup?Im using ulano qx1.I know it varies with different emulsions screens and mesh color but im trying to get a rough idea of where to start . thanks! Kevin |
|
|
| Back to top |
|
|
|
| ogsk8r |
| Posted: Tue Jul 08, 2008 10:35 pm |
|
|
ORDER OF THE SKULL
Joined: 06 Jan 2006
Posts: 2701
Location: las vegas, nv.
|
| im using ulano QTX and i am exposing screens for about 2.5 min 3 tops. |
_________________
Yea Cornmelia !!!! |
|
| Back to top |
|
|
