| SkullandBonesSkateboards.com Forum Index » SCREEN PRINTING » Emulsion won't come out |
|
Page 1 of 1 |
|
| Author |
Message |
| steevner |
 Posted: Mon Apr 21, 2008 10:24 pm |
 |
|
|
Joined: 16 Apr 2008
Posts: 2
|
I've been using all speedball products, just started (attempting) to screen a few days ago. I messed up the exposure 2wice before I got it right, then when I went to do some test prints on a pillowcase I didn't was the ink out of the screen between each print. The ink dried in the screen and now neither the emulsion will come out...
Tryed: speedball photo emulsion remover, acetone (cancerz!) and varsol thinner (cancerx2!) and windex (recommendid in the destructions) Now neither the image nor the emulsion will come out. Any ideas? |
|
|
| Back to top |
 
|
|
|
| steevner |
| Posted: Thu Apr 24, 2008 2:39 pm |
|
|
|
Joined: 16 Apr 2008
Posts: 2
|
| thanks for all the help... I managed to get it out after over an hour of pressure washing, not fun. |
|
|
| Back to top |
|
| mkelty |
| Posted: Thu Apr 24, 2008 3:55 pm |
|
|
ORDER OF THE SKULL
Joined: 06 Oct 2006
Posts: 3644
Location: Springfield, OR
|
|
| Back to top |
|
|
|
|
