SkullandBonesSkateboards.com Forum Index
FAQ   Search   Memberlist   Usergroups  
Log in   Register
Loading...
Username:   Password:
SkullandBonesSkateboards.com Forum Index  »  SCREEN PRINTING  »  Little help...
 Post new topic   Reply to topic
Page 1 of 1    

Little help...
Author Message
ivescreenedforless
Posted: Sun Sep 14, 2008 11:10 am Reply with quote
Joined: 30 Sep 2007 Posts: 150
I built a frame similar to the one on diyskate and it worked ok. I didnt get very good contact along the rails of the board, I assume I need to exaggerate the curves of the frame a bit more.

Also when stretching the mesh I had some issues with the mesh not following the curves near the nose and tail. The tension lifted those parts up. Any tips on stretching these awkward frames.

I'm going to try the D20 frame, looks like it should work alot better.

Has anyone tried the technique with the mesh on a flat metal frame that screws into the wood frame. If so are their any issues with the image getting distorted when attaching it? And can you reuse the metal frame? Seems like it would retain the shape of the wood frame and become somewhat useless.

Thats all for now, many thanks in advance.
Back to top View user's profile Send private message
 
    Display posts from previous:  
Post new topic   Reply to topic
Page 1 of 1    
All times are GMT - 5 Hours
The time now is Sat May 10, 2025 1:10 am
SkullandBonesSkateboards.com Forum Index  »  SCREEN PRINTING
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum