SkullandBonesSkateboards.com Forum Index » MANUFACTURERS FORUM » scotchlite heat lamp vacuum table |
Page 1 of 1 |
|
Author |
Message |
thevagrant |
Posted: Thu Jul 19, 2007 3:34 pm |
|
|
Joined: 18 Mar 2003
Posts: 19
|
does anyone know about this piece of machinery? I am capable of acquiring it for free, but don't know if it can be used to apply heat transfers to a deck. (description) 57"wide by 54" long. vacuum table in which the decks can be put onto, the heat transfers on the decks, the rubber matt comes down over the graphics and deck, pump is applied to draw the rubber matt down to the table. Lamps are put on (i.e. lamps are 3200 watts 8 x 4k) The brand of product is scotchlite serial #1743. It was used to bake street signage. Any help on this would be outstandingly appreciated. |
|
|
Back to top |
|
|
Herosk8 |
Posted: Thu Jul 19, 2007 3:45 pm |
|
|
Joined: 14 Jul 2005
Posts: 147
Location: Springfield, MO
|
it sounds like it might work, get it for free and try it. if it doesnt work your not out any money for the equipment! |
|
|
Back to top |
|
|