| SkullandBonesSkateboards.com Forum Index » SCREEN PRINTING » inks |
|
Page 1 of 1 |
|
| Author |
Message |
| mbeer500 |
 Posted: Sat Sep 30, 2006 6:19 am |
 |
|
|
Joined: 08 May 2006
Posts: 9
Location: Scotland
|
| From reading this forum most guys recommend the nazdar series for board printing. Unfortunatly nazdar doest supply in the UK. What other inks do you folks recommend as a good alternative for decks? |
Last edited by mbeer500 on Sat Sep 30, 2006 9:03 am; edited 1 time in total |
|
| Back to top |
  
|
|
|
| Fool's Gold |
| Posted: Sat Sep 30, 2006 7:51 am |
|
|
|
Joined: 10 Mar 2005
Posts: 284
Location: Ontario Canada
|
| Coates Screen makes good solvent inks . . TW makes good waterbased inks. |
_________________
IRONCLAD GRAPHICS: Custom screen printed posters, apparel and stickers. |
|
| Back to top |
|
| eric |
| Posted: Sat Sep 30, 2006 12:22 pm |
|
|
|
Joined: 24 Aug 2005
Posts: 19
|
| i just picked up some coates myself. how much would you suggest thinning it to go thru a 300 mesh for decks. |
|
|
| Back to top |
|
|
|
| mbeer500 |
| Posted: Sun Oct 01, 2006 6:40 am |
|
|
|
Joined: 08 May 2006
Posts: 9
Location: Scotland
|
| Looked through the coats inks...Is the 'A' Series recommended? |
|
|
| Back to top |
|
| Fool's Gold |
| Posted: Sun Oct 01, 2006 12:07 pm |
|
|
|
Joined: 10 Mar 2005
Posts: 284
Location: Ontario Canada
|
You would want to call the supplier about this, tell them what you want to print on and they should have a specific series that will work. I know the Enamalux (C-2 series will stick to virtually everything, I use it for plate steel, plastics, glass and anything else that's hard or super smooth.
You would have to experiment with the reducers (get the correct solvent reducer, it's different depending on the ink series) |
_________________
IRONCLAD GRAPHICS: Custom screen printed posters, apparel and stickers. |
|
| Back to top |
|
|
