| SkullandBonesSkateboards.com Forum Index » MANUFACTURERS FORUM » Heat transfer question |
|
Page 1 of 1 |
|
| Author |
Message |
| austria |
 Posted: Mon Aug 01, 2016 7:03 pm |
 |
|
|
Joined: 01 Aug 2016
Posts: 3
|
Hey guys just found this forum. very helpful a lot of useful info.
I'm trying to set up deck manufacturing in Russia.
Looking for a company that is able to supply me graphics on heat transfer film.
Any leads will be greatly appreciated.
Thanks again. |
|
|
| Back to top |
  
|
|
|
| slob-air |
| Posted: Mon Aug 01, 2016 9:56 pm |
|
|
Site Admin
Joined: 27 Oct 2001
Posts: 63528
Location: S&B HQ
|
Why would you want someone to supply you with graphics? Or do you mean put your graphics onto heat transfers?
Your avatar exceeded the 100x100 pixel limit and was thus deleted. |
_________________
>>>>>Get your S&B Stickers here<<<<< |
|
| Back to top |
 
|
| austria |
| Posted: Tue Aug 02, 2016 5:48 am |
|
|
|
Joined: 01 Aug 2016
Posts: 3
|
slob-air wrote: Why would you want someone to supply you with graphics? Or do you mean put your graphics onto heat transfers?
Your avatar exceeded the 100x100 pixel limit and was thus deleted.
yeah i mean put my graphics onto heat transfers |
|
|
| Back to top |
|
|
|
| slob-air |
| Posted: Tue Aug 02, 2016 7:41 am |
|
|
|
Site Admin
Joined: 27 Oct 2001
Posts: 63528
Location: S&B HQ
|
You can do that yourself with the right kind of printer. Even better is to have them silk screened onto the transfers.
But keep in mind that the transfers vary wildly in what they do, how they do it, thickness, brittleness and whether they dry out fast or not—some transfer the entire film to the deck (some much better than others) while the variety that Santa Cruz uses only transfers the ink that has been screened to the transfer (my preferred method—though its not without its difficulties). |
_________________
>>>>>Get your S&B Stickers here<<<<< |
|
| Back to top |
|
| austria |
| Posted: Tue Aug 02, 2016 2:41 pm |
|
|
|
Joined: 01 Aug 2016
Posts: 3
|
slob-air wrote: You can do that yourself with the right kind of printer. Even better is to have them silk screened onto the transfers.
But keep in mind that the transfers vary wildly in what they do, how they do it, thickness, brittleness and whether they dry out fast or not—some transfer the entire film to the deck (some much better than others) while the variety that Santa Cruz uses only transfers the ink that has been screened to the transfer (my preferred method—though its not without its difficulties).
cool. thanks a lot for your help. couple more questions
where do i get these transfers and whats the best kind?
What kind of ink is best to screen print the transfers?
So basically i need to silk screen the transfer and that it? |
|
|
| Back to top |
|
|
