SkullandBonesSkateboards.com Forum Index » WANTED!! » Nose guard to fit this... |
Page 1 of 1 |
|
Author |
Message |
gheepup |
Posted: Tue Mar 01, 2016 12:51 am |
|
|
Joined: 24 Dec 2008
Posts: 412
Location: PNW
|
...Sims E Lester. I am not sure what make was on there but I do know it was not a Nose Bone nor "Wide" Nose Bone (pretty sure regular and "wide" nose bones are the same with the exception of the word wide but that is another story). I also know it wasn't one of those thin generic ones that were translucent. Knowing the hole spacing would help identify it.
3" from the side holes to the center hole.
For this nose that equates to 5-3/8" across the nose outside hole to outside hole.
The rail plastics are Variflex and I believe at one time the risers were Variflex too. I would also be interested in 1/2" Variflex risers, the oversized kind with the tic-tac toe grid pattern.
Could this nose guard that I am after be Variflex? I know its not their Zynose because the holes are too close to the edge of the deck.
White, black, green, blue would be good and I would possibly consider pink. Need not be NOS. |
Last edited by gheepup on Sun Jun 18, 2017 12:37 pm; edited 1 time in total |
|
Back to top |
|
|
gheepup |
Posted: Sat Mar 05, 2016 11:57 am |
|
|
Joined: 24 Dec 2008
Posts: 412
Location: PNW
|
Looking for nose guard brands that have wider hole spacing than Nose Bones and generic nose guards. Anyone got any suggestions that might help in my search? Thanks. |
|
|
Back to top |
|
gheepup |
Posted: Sun Jun 18, 2017 12:39 pm |
|
|
Joined: 24 Dec 2008
Posts: 412
Location: PNW
|
Could the nose guard be an ODI nose spoiler?
Anyone got a used one they would be willing to let go of?
Edit: Or NOS would be good too. |
|
|
Back to top |
|
|
Herwig |
Posted: Mon Jun 19, 2017 5:32 am |
|
|
ORDER OF THE SKULL
Joined: 25 Apr 2010
Posts: 3675
Location: Hicksville :-), Lower Bavaria
|
I have NOS ODI spoilers still in their OG packing but not in white and shipping might kill it for you anyway since they are located in Germany.
I can look for the bolt sizing later today if you want me too regardless. |
_________________ Tricks evolve,
spots change,
trends fade, but...
skateboarding is forever! |
|
Back to top |
|
gheepup |
Posted: Mon Jun 19, 2017 8:38 am |
|
|
Joined: 24 Dec 2008
Posts: 412
Location: PNW
|
Herwig wrote: I have NOS ODI spoilers still in their OG packing but not in white and shipping might kill it for you anyway since they are located in Germany.
I can look for the bolt sizing later today if you want me too regardless.
Black, green, blue or pink would work too but yes white would be preferred. I could get 2 of those colors off ebay right now but would like to explore other options first. You are correct that shipping from Germany would probably kill it.
I would appreciate it very much if you could check out the bolt hole spacing later for comparison to my existing holes. Thank you Herwig. |
|
|
Back to top |
|
Herwig |
Posted: Mon Jun 19, 2017 10:12 am |
|
|
ORDER OF THE SKULL
Joined: 25 Apr 2010
Posts: 3675
Location: Hicksville :-), Lower Bavaria
|
The hole spacing on the ODI Spoiler differs significantly from the measurments you posted up there. So not a hole spacing on your board that fits ODI Spolers.
ODI hole spacing is approx. 2.5" from the side holes to the center hole and approx.4.75" across outside hole to outside hole |
_________________ Tricks evolve,
spots change,
trends fade, but...
skateboarding is forever! |
|
Back to top |
|
|
gheepup |
Posted: Tue Jun 20, 2017 12:29 am |
|
|
Joined: 24 Dec 2008
Posts: 412
Location: PNW
|
Thanks for checking that spacing out for me Herwig. Much appreciated. |
|
|
Back to top |
|
|