SkullandBonesSkateboards.com Forum Index » DOWNHILL / SPEEDBOARDING / LONGBOARDS » short for long |
Page 1 of 2 Goto page 1, 2 Next |
|
Author |
Message |
stalker |
Posted: Fri Aug 20, 2004 3:33 pm |
|
|
Joined: 20 Aug 2004
Posts: 5
Location: outside
|
maybe ot, but i've been skating a long board (43'') for about three years, and have recently switched to a deathbox hackett. i've been playing around on it for a week now, street only (there are NO trannies round here). man, that thing is short. i'm using 65mm kryptos and some old 9'' indies w/ soft bushings. any recommendations on this setup? any suggestions on riding style? i'm a little unhappy about the narrow stance, i could ollie my longboard, but can't get down with it on the db, feels like a whole new move. i know practice will do, but any tips for riding a short board? thx, stalker |
|
|
Back to top |
|
|
Stubbs |
Posted: Sat Aug 21, 2004 12:07 am |
|
|
Joined: 09 Jun 2003
Posts: 12556
Location: Dallas, TX
|
You ruined yourself on the longer wheelbase. I know because I did the same thing years back. I am not comfortable on anything below about 17.5". You can get your short board ride feeling good again but it's going to take some time with that board by itself for a while. |
|
|
Back to top |
|
letsgoskatepool |
Posted: Sat Aug 21, 2004 12:33 am |
|
|
Joined: 26 Jun 2003
Posts: 6104
Location: The wrong place
|
stubbs, i totally agree. i used to ride short wheelbased boards for the longest time, but once i started learning about what is out there, my wheelbase has grown. but what i have found is that i am having a lot more trouble navagating tight pools with an 18" wheelbase! right now my TPS model, which i use for my pool missions, feels tiny! but i have been making myself use it as the pool season begins to come around. |
|
|
Back to top |
|
|
ShackleMeNot |
Posted: Sat Aug 21, 2004 3:27 am |
|
|
Joined: 27 Apr 2004
Posts: 8896
Location: Pangea
|
I never really paid attention to wheelbase sizes until early this year when I bought an Alva squaretail to ride. Set it up thinking it would ride similar to My SC Kendall that i had been riding and boy was I off. I'm used to the 14-14.5 wb of popsicles and i was not ready at all for the bigger stance on that board. can't even ollie higher than a deck on it, lol. decent for mellow pools tho |
_________________ Reagan SMASH!!! |
|
Back to top |
|
stalker |
Posted: Sat Aug 21, 2004 9:27 am |
|
|
Joined: 20 Aug 2004
Posts: 5
Location: outside
|
ok thx guys i think i'll keep on trying and get some pads on in case i stomp on the nose kick accidently- that's what happened yesterday, bad wrist now... |
|
|
Back to top |
|
Stubbs |
Posted: Sat Aug 21, 2004 12:06 pm |
|
|
Joined: 09 Jun 2003
Posts: 12556
Location: Dallas, TX
|
It is definitely harder to navigate a bigger board, especially in tight trannys. But, I figure if you can make your big board do what your small boards does you are doing something right. |
|
|
Back to top |
|
|
letsgoskatepool |
Posted: Sat Aug 21, 2004 12:10 pm |
|
|
Joined: 26 Jun 2003
Posts: 6104
Location: The wrong place
|
totally, do you ride your hustler in tight pools?? i can do somestuff with my 40" in tighter pools, but pretty much only carve and do like scratch grinds. |
|
|
Back to top |
|
Stubbs |
Posted: Sat Aug 21, 2004 12:14 pm |
|
|
Joined: 09 Jun 2003
Posts: 12556
Location: Dallas, TX
|
The Hustler is the shortest board I ride, period. Shallows are the toughest. |
|
|
Back to top |
|
PlayGod |
Posted: Sat Aug 21, 2004 12:39 pm |
|
|
ORDER OF THE SKULL
Joined: 05 Nov 2003
Posts: 3882
Location: Dirty South
|
It's two distinctly different riding styles.
When I ride a longboard... 17" plus wheelbase, I ride with front foot angled behind the front truck, most weight on my front foot. Most carve and pump action happens with the back foot. It's more of a surfing style.
When I ride shorter wheelbases, particularly if they are under 15", I ride mostly with front foot angled on top of the front truck, some toes on the nose kick, and weight shifted back. Carving and pumping use both legs, but the front foot can help to pull the board through the arc.
I used to have to be extra careful when riding a shorter board (going off the front), but it's easier now that I've gotten used to moving my feet around on the board and making sure that I adjust my stance. You really have to pay attention if you are pushing on a short board, to make sure you move your foot back behind the front truck.
On the road flats and downhills, I think it's more useful to have the wider, rearward or centered stance of a longboard. Getting comfortable with moving around on the board while it's in motion is good no matter what size you are riding.
I can't ollie worth a shit on anything with a 16" or greater wheelbase. |
|
|
Back to top |
|
|
AlvaCollector |
Posted: Mon Aug 23, 2004 7:15 am |
|
|
Joined: 26 Jul 2004
Posts: 3436
|
I remember when I got my first 36" deck. Fell in love with that old Alva caddy. Just felt comfortable with the wider stance. Well, after about 6 months of riding it I decided to hop on a normal sized board(CW Naked Raygun). I had the hardest time just getting out of the drive way of my condo. The back end of my board kept coming off the ground when I went to push. I keep a Gringo Gibson set up for messing around in the driveway here at the house but my day-to-day set up is a 36". |
|
|
Back to top |
|
|