| SkullandBonesSkateboards.com Forum Index » SCREEN PRINTING » woot |
|
Page 1 of 1 |
|
| Author |
Message |
| ThrashCan |
 Posted: Mon Mar 22, 2004 7:03 pm |
 |
|
Joined: 16 Mar 2004
Posts: 1331
|
Well, I found someone to make me a screen and burn images for me. Its gonna be a big rectangle screen for now. What dimensions do you suggest for a flat screen to print tip to tail.
Now its just a matter of technique. I saw some talk about space between the screen and the board..i think...? Do i want the screen to hover over the deck and then make contact only where im squeegieing???
Ok thanks alot, I should have this screen in a week or 2 and Ill take some pics of my first deck.
rock! |
|
|
| Back to top |
  
|
|
|
| Five Points Skateboards |
| Posted: Mon Mar 22, 2004 8:15 pm |
|
|
ORDER OF THE SKULL
Joined: 12 Mar 2003
Posts: 4167
Location: Columbus, OH
|
Cool, but I don't see how you're going to pull off a tip to tail screen with a flat screen. If it works, I need to know your secret! Good luck
|
_________________
Tim
Five Points Skateboards |
|
| Back to top |
|
| ThrashCan |
| Posted: Mon Mar 22, 2004 8:54 pm |
|
|
|
Joined: 16 Mar 2004
Posts: 1331
|
haha well I wasnt sure if it would work, i was thinkin if my screen was long enough and had some slack it would stretch to fit the nose and tail.
Im gonna do something like this on my first deck. Ill just get a nice glossy white spraypaint for the background and then screen the USC. This is just a shitty version. The real image is perfect 
http://www.uselessskateco.com/truckwrap2.gif
I would still like to know how the screen should lay on the deck. Flush against it or overing above it?
Thanks ALOT to all who have helped me!!! |
|
|
| Back to top |
|
|
|
| ThrashCan |
| Posted: Tue Mar 23, 2004 3:12 pm |
|
|
|
Joined: 16 Mar 2004
Posts: 1331
|
Well nobody posted it but I found out elsewhere that the screen should be like 1/4 an inch above the deck.
|
|
|
| Back to top |
|
|
